PFC CONTROLS | Miami, Electric Gate Operators, Sliding Opener, Swing Opener, Intercoms, Turnstiles, Bollards, Traffic Spikes, Parking Barrier

NXT Hardware Platform

NXT-2D - 2 Door Controller

• 2 Door Controller for Keri’s Doors NetXtreme product line
• On-board TCP/IP - no network adapters required
• Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
• Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
• Embedded MAC Address for one button Auto-Configuration
• Standard 4 PIN Block and RJ Jack built-in for network connection
• Re-assignable Inputs and Outputs
• Flash Memory for easy firmware upgrades
• Quick Disconnect Connectors
• Flash Memory for easy firmware upgrades
• Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
• 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
• Built-In Tamper Input
• Locking Metal Enclosure (optional without)

NXT-3R - Mullion Reader

• The NXT-3R TM Reader usually designed for mounting on metal window mullions is one of the smallest on the market yet offers exceptional read range.
• Measuring just 3.75 inches high by 1.60 inches wide by .625 inches deep (9.5 cm high x 4.1 cm wide x 1.6 cm deep), the NXT-3R is one of the smallest proximity readers on the market.
• It is designed to mount directly on 4Xmetal or a wall with out mounting brackets or spacers.

NXT-4D - 4 Door Controller

• 4 Door Controller for Keri’s Doors NetXtreme product line
• On-board TCP/IP - no network adapters required
• Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
• Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
• Embedded MAC Address for One button AutoConfiguration
• Built-In Tamper Input
• Standard 4 PIN Block and RJ Jack built-in for network connection
• Re-assignable Inputs and Outputs
• Flash Memory for easy firmware upgrades
• Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
• 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
• Locking Metal Enclosure (optional without)
• 96 Bit Encryption

NXT-5R - Wall Switch Reader

• The NXT-5R measures 4.18 inches high by 2.95 inches wide by .625 inches deep (10.6 cm high x 7.5 cm wide x 1.6 cm deep) and can be mounted on a US single gang electrical box or flat on a wall.
• Read range is up to 6" (15cm) when mounted at least one inch off metal.
• If the reader is mounted using a metal electrical junction box with the thickness of the wall material separating the reader from the box, read range will be reduced.

NXT-C
Standard Light Proximity Card

• Wallet friendly - thinner than other comparable proximity cards
• Extremely durable
• Industry standard formats
• Unique ID codes
• Lifetime Warranty

NXT-I & NXT-S
Multi Technology Card

Unless the user requires the combination of mag stripe and proximity, the NXT-C is recommended over the NXT-I or NXT-S Multi Technology Cards whenever possible because of its lower cost and lifetime warranty. The Standard Light Cards can be fitted with a PVC label or "skin" which can accept a direct printed image to provide photo ID at a much lower cost and greater durability.

• ISO Thin, just 0.031” (0.8mm)
• With or Without Magnetic Stripe
• Can Also Print Bar Codes
• Uniqe codes

PXL 500 Firmware

PXL500P / PXL500W
Expandable controller.

• The PXL-500 Tiger Controller has all of the functionality needed to manage a single door, alarm output, and 2 reader ports.
• A second door can be added when used with SB-593 Satellite Expansion Board.
• Locking Metal Enclosure that can also house KPS-4 Power Supply and battery
• Added RAM for increased cardholder capacity (up to 65K per controller)
• On-board LAN socket for new low cost LAN-500
• Increased EEPROM memory to support future enhanced firmware capabilities
• Double row header pins to ensure SB-593 is properly seated on PXL
• Additional LED indicator to confirm SB is properly seated
• RS-232 connector changed from DB-9 to quick disconnect terminal block
• RS-485 continuity indicator LED
• RS-485 connector different size so as not to interconnect with power input
• LCD Display moved up so as not to hang below the PC Board

MS-3000
Micro-Star Proximity Reader.

• Considered by many to be the smallest, most attractive proximity reader available, the MicroStar is designed to mount directly on a metal window/door frame (mullion) or any other location a small reader is required.
• Size is just 3.4" x 1.4" x 0.38" (86 mm x 36 mm x 10 mm)
• Read range of up to 4" (10 cm).
• Lifetime warranty.

MS-5000
Mini-Star Proximity Reader.

• Designed to mount on a standard USA single gang box, the MiniStar provides up to 7" (18 cm) read range.
• Measures just 4.3" x 3.0" x 0.38" (109 mm x 76 mm x 10 mm).
• Available in Black or White.
• Lifetime warranty.

SB-593
Satellite Expansion Board

• The SB-593 Satellite Expansion Board plugs directly onto the PXL-500 to provide an additional 8 general purpose inputs and 4 general purpose outputs.
• With a simple jumper setting, two of the inputs and two of the outputs are configured to economically manage a second door.

KC-10X / KC-26X
Standard Light Proximity Card

• The most popular proximity card in existence, it is thin enough to be "wallet-friendly" yet durable enough to carry a lifetime warranty.
• It comes standard with a vertical slot punch and can accept photos and graphics via industry standard adhesive packs (dye sublimation or laminated).
• Size is 2.13" x 3.38" x 0.065" (54 mm x 86 mm x 1.6 mm).
• Sequentially numbered (C5 formatting excepted).
• Lifetime warranty.

MT-10X / MT-26X
MultiTechnology Proximity Card

• A PVC card capable of printing images from industry standard dye sublimation printers.
• It also contains a magnetic stripe for applications where other systems also using magnetic stripe technology are in use.
• Size is 2.13" x 3.38" x 0.031" (54 mm x 86 mm x 0.8 mm).
• Sequentially numbered (C5 formatting excepted).
• 1 Year Warranty.